hvac
NYS Clean Heat Rebates: How New Yorkers Cut Heat Pump Costs Under the New Weatherized Tier
NYS Clean Heat rebates on single-family air-source heat pumps run $2,500 to $14,000, based on your utility, your insulation, and your old system.
In This Article
NYS Clean Heat Rebates: How New Yorkers Cut Heat Pump Costs Under the New Weatherized Tier
The rebate on a whole-home heat pump in New York now depends a lot on how well your house holds heat. Under the NYS Clean Heat program manual dated September 1, 2026, a typical upstate single-family home outside a Disadvantaged Community can get $4,000 for a full-load air-source system. That same project can reach $8,000 if the home qualifies for the new Weatherized Tier, and up to $12,000 if the old fossil fuel system is also removed.
Those are real program figures, and they are also moving targets. The utilities that run the program can revise the numbers when they issue a new manual, so your contractor should confirm the current amounts before you sign.
The federal side has gotten simpler and less generous. The 25C energy efficient home improvement credit ended for equipment placed in service after December 31, 2025, so a heat pump installed now will not earn it. That leaves the utility incentive as the main discount for most homeowners, and it makes the choices below worth some attention.
Who Runs the Program and Who Qualifies
Six utilities administer NYS Clean Heat: Central Hudson, Con Edison, National Grid, NYSEG, Orange & Rockland, and RG&E. Each residential project gets its incentive from the electric utility serving that address. PSEG Long Island and the Long Island Power Authority are not among the six, so Long Island homeowners should ask PSEG Long Island what it currently offers.
Starting in 2026, the program covers existing one- to four-unit residential buildings, along with up to four apartment units in larger buildings whose owners do not control the entire building. Larger multifamily and commercial projects moved to separate utility programs. New construction can no longer get air-source space heating incentives, though ground-source systems remain eligible.
Each dwelling needs an active electric account that pays into the System Benefits Charge, a charge on the utility bill. A unit that already received a full-load Clean Heat incentive cannot get a second one. Renters are not automatically shut out, since the rules speak of units owned or controlled through rental agreements, but the landlord will need to be on board for almost any heating system change.
What the Incentives Look Like by Utility
Amounts vary by four main factors: your utility, your building type, whether the address sits in a Disadvantaged Community, and whether the home meets the Weatherized Tier. The table below shows full-load air-source figures for a single-family home outside a Disadvantaged Community, based on the September 2026 manual.
| Utility | Base with existing system kept | Weatherized with existing system kept | Base with decommissioning | Weatherized with decommissioning |
|---|---|---|---|---|
| Central Hudson | $4,000 | $8,000 | $7,000 | $12,000 |
| National Grid | $4,000 | $8,000 | $7,000 | $12,000 |
| NYSEG | $4,000 | $8,000 | $7,000 | $12,000 |
| RG&E | $4,000 | $8,000 | $7,000 | $12,000 |
| Orange & Rockland | $4,000 | $8,000 | $7,000 | $12,000 |
| Con Edison | $2,500 | Not offered | $7,000 | $10,000 |
Con Edison's lower first figure applies to systems using integrated controls with the existing heating equipment, and Con Edison does not offer that option in the Weatherized Tier. Smaller homes and apartments generally get about half of the single-family figure. Homes in a Disadvantaged Community can get more: National Grid's top air-source amount reaches $14,000 there, and Con Edison's reaches $11,000.
Geothermal incentives sit in a higher range. Non-weatherized retrofit amounts for single-family homes run from $15,000 at Central Hudson, NYSEG, and RG&E to $18,000 at National Grid and Orange & Rockland, with an added $5,000 in the Weatherized Tier. Ground-loop drilling keeps geothermal the more expensive project even with that help.
Heat pump water heaters have a separate category, usually around $1,250 upstate. Con Edison's rate is $1,300, with a limited-time $1,500 offer on applications submitted through November 30, 2026. If you need a new water heater anyway, that deadline is close.
The 70% and 85% Project Caps
No incentive can exceed a set share of your project cost. Most projects are limited to 70%, while projects in Central Hudson territory or those getting Disadvantaged Community incentives can go up to 85%. For a $15,000 mini-split job, a 70% cap works out to $10,500, which would trim a $12,000 incentive and matters even more on smaller scopes.
You can check whether your address is in a Disadvantaged Community with a free NYSERDA lookup tool. Your contractor should do this before writing the proposal, because the result changes the available amount.
How to Reach the Weatherized Tier
A home needs to qualify through only one of three pathways. Each of them has different paperwork, and the first one is the simplest if it fits your house.
- Post-2010 Build: the home was built in 2011 or later, shown through records such as tax assessments, permits, or a certificate of occupancy.
- Past Participation: the home completed a qualifying package through a listed weatherization program, including NYSERDA Comfort Home, Con Edison Weather Ready and Sealed, the NYSEG and RG&E Home Insulation and Air Sealing Program, National Grid Total Home Comfort, or the O&R Sealed Comfort Plan.
- Performance: the home's calculated heating load per square foot falls under a set limit, supported by the contractor's load calculation and other documentation.
For most older homes in Buffalo, NY, Syracuse, NY, or the Hudson Valley, the second pathway will be the realistic one. The math is often appealing. A $4,000 jump between the base and Weatherized rates can offset a large part of an insulation and air sealing project, and a tighter house also lets you buy a smaller system.
Not every package in a listed program qualifies, so ask which specific package counts before you hire the insulation crew. Timing matters beyond the current rates as well. The state order behind the program calls for weatherization criteria to become a prerequisite for incentives by March 1, 2028, with the details still to come.
What Makes a Project Eligible
The incentive categories turn on one concept: the heat pump system must be able to meet the full heating load of the project scope at design conditions. Your contractor documents this with an ACCA Manual J or equivalent load calculation. Air-source equipment must be on the NEEP Cold Climate Product List or meet its criteria, and systems sized above 120% of the load may get extra review.
A heat pump can run alongside your existing boiler or furnace in many cases, typically using integrated controls. New fossil fuel equipment is a different matter, since the rules prohibit installing it as part of an eligible project. If your furnace is failing and you want a hybrid setup, that distinction needs to be addressed early.
The higher decommissioning category requires the old fossil system to come out of service so the heat pump becomes the only heating system in the project scope. A completed checklist must go in with the application. If you are leaving an oil tank behind or changing a chimney setup, get the removal cost into your quote before comparing the extra incentive.
How the Money Reaches You
You generally do not apply on your own for space heating rebates. A Participating Contractor handles the application, and the path differs by territory. Con Edison customers must get an air-source rebate as an instant discount on the invoice through a Participating Contractor, and projects sold without that discount are not eligible.
Upstate customers receive either an instant discount before installation or a check after the work. The manual requires the contractor to pass the incentive along to the customer. Ask your contractor to show the rebate as its own line on the proposal, along with the net price you will pay.
My recommendation is to get at least two quotes from enrolled contractors, then compare the net price, the load calculation, and the equipment model. You can start with heating and cooling contractors in our directory and confirm each company's Clean Heat enrollment before scheduling a visit. Heat pump water heaters are the exception to several of these rules, since an owner can apply for that incentive independently.
A Sample Budget for an Upstate Home
Picture a 1950s single-family home in National Grid territory, outside a Disadvantaged Community, that heats with gas. A ducted cold-climate system might draw quotes of around $18,000 to $25,000, though pricing varies with ductwork, electrical upgrades, and house size.
If the owner keeps the furnace as backup, the base incentive is $4,000. Removing it raises that to $7,000. Completing a qualifying weatherization package first and removing the furnace could reach $12,000, which changes the project far more than any single equipment upgrade.
NYSERDA and the utilities also list financing and income-based help for weatherization and electrification. Rules and funding for those change, so ask about them when you request quotes. For more ideas on home upgrades and maintenance, take a look at other homeowner guides on our blog.
Clean Heat Questions From New York Homeowners
Can I still claim a federal tax credit on a heat pump?
Not under 25C if the system is placed in service in 2026 or later. A heat pump installed during 2025 can still be claimed on the 2025 return using Form 5695. Your tax preparer can confirm how that applies to your dates.
Does NYS Clean Heat work on Long Island?
PSEG Long Island and the Long Island Power Authority are not among the six program administrators listed in the 2026 to 2030 plan. Long Island homeowners should check with PSEG Long Island for current offers. Do not assume the upstate $4,000 base figure applies there.
Will I lose the rebate if I keep my gas furnace?
Not necessarily, since Category 2 projects can pair a heat pump with existing fossil equipment through integrated controls. You would receive a lower amount than a decommissioning project, such as $4,000 instead of $7,000 at most upstate utilities. A brand-new furnace installed with the project would disqualify it.
Can a mini-split in one room qualify?
Only if the system meets the full-load rules for the project scope, so a single add-on unit usually will not. Partial-load systems installed earlier can move up through Category 4, worth $3,000 to $4,000 for many single-family homes. The new equipment has to cover more than 50% of the building heating load.